[China Glass Network] Office decoration often uses glass partitions for decoration. What are the general procedures and construction techniques for glass partition decoration? The construction process mainly has the following steps: (2) Installation of the upper glass groove on the lower side of the embedded iron piece: Install the groove bottom steel part according to the size of the design drawing, fix it with expansion bolts, and then install the upper and side steel glass grooves. Level straight and then fix. Install the bottom tape in the tank, all non-stainless steel parts are painted with anti-rust paint; (3) Glass block installation and positioning: All tempered flat glass is customized by professional manufacturers and shipped to the construction site. Firstly, clean the glass tank and the glass block. Place the glass block in the installation slot with a glass mounting machine or a suction cup. After leveling and vertical, fix it with a plastic block. The same glass wall is installed and leveled. Start injection; (4) Injection: First clean the upper and lower parts, the side stainless steel glass tank and the glass joint injection, then stick the glass and stainless steel surface on both sides of the glue with white tape to leave the glue joint position. The national regulations require injection molding, and the same seam is finished with a single shot and is not stopped. (Note: a glue injection joint must be dry to inject glue, avoid moisture; b. The glue on the upper and lower stainless steel tanks is structural silica gel, and the glue injected between the glass blocks is transparent glass glue.) Cashmere Knitted Scarf,Cable Knit Cashmere Scarf,Knitted Cashmere Wrap,Hand Knitted Cashmere Scarf Huhhot Hurray Accessories Co.,Ltd , https://www.hurrayaccessories.com
(1) Measuring the pay-off line: measuring the pay-off line according to the design drawing size, measuring the elevation of the base level, the central axis of the glass wall and the upper and lower parts, and the position line of the stainless steel groove;
(5) Clean and hygienic: Clean the installed glass block with a special glass cleaner. (But don't wash with an acidic solution).